Our tech is amazing that they can make a real object out of a 3D model from your computer. The machine you will need to make it happen is a 3D printer such as FlashForge Adventurer 3 Lite Vs Finder which are similar but also different from each other. These printers are marketed towards those who want the best convenience but will not make anything big since the capacity is quite small. If you are also curious about what they can offer, let’s see the comparison below.
In this comparison, we are going to talk about:
- What are 3D Printers
- What are FlashForge Adventurer 3 and Finder
- How are the Design of FlashForge Adventurer 3 and Finder
- How are the Build Volume of FlashForge Adventurer 3 and Finder
- How are the Build Plate in FlashForge Adventurer 3 and Finder
- What else FlashForge Adventurer 3 and Finder can offer
- FlashForge Adventurer 3 Vs Finder
3D Printers
Being able to make something out of thin air sounds impossible and it is at least for the tech we have today, but with a type of material and a machine to work with, you will be able to make various objects out of a digital design from your computer. This is a 3D printer which as the name suggests will “print” your design in real life so there is a physical object that we can touch or manipulate for different purposes.
While the idea was already around for quite some time, there are still some people who are not familiar with what they can offer. In general a 3D printer is very similar to our regular paper printer and operated in a similar manner. You feed a file into the printer through a memory card slot, wirelessly from a device, or from your computer through USB cable and then the machine will work based on this design using the material they stored already, in this case the filament.
Different types of 3D printers will have a different material or mechanism but today we are focusing on FDM printers such as Biqu B1 Vs Ender 3 Pro. When talking about 3D printers chances are this is the type of machine most people will be recalling because they are the most popular as well. They usually come in boxy housing with one or two extruders installed vertically. This type of machine is known as Cartesian style while the other one that looks taller and has 3 pillars is called a Delta model.
They are easy to start with and also beginner friendly since the way they are operated is more convenient than for example an SLA machine. To print with one, you will need a filament which is usually a type of plastic that will melt at a certain temperature and harden again once it cools down without damaging the quality of the material itself. The heating ability of a 3D printer and its nozzle are important factors that affect the overall performance of the printer.
The way this printer works is by depositing one layer at a time of this heated material to build the design we have fed the machine with before. It is done at a fairly quick speed to prevent the layer below to harden before the next one is put down. The resolution of an FDM is related to the nozzle size and how stable the machine is moving along its axis. It is both a straightforward and complicated process at the same time yet still fascinating.
| flashforge Adventurer 3 Lite | flashforge Finder | |
|---|---|---|
  |   |
|
| Product Dimensions | 20.2 x 18.9 x 16.7 inches | 16.54 x 16.54 x 16.54 inches |
| Shipping Weight | 27.25 Pounds | 24.25 Pounds |
| Best offer | Check price | Check price |
About FlashForge Adventurer 3 and Finder
When it comes to 3D printers, the bigger is not always better but they will be the more expensive. A machine build capacity is related to the form factor since it limits the movement of the involved axis. They don’t have to be expensive since as long as the build quality is good and the machine is well made the result will most likely be good as well but, different people may want to look for different abilities or even different build capacity.
For enthusiasts who are also attracted to tweaking the machine manually, an affordable choice like Ender 3 is a great option because you will learn a lot through the manual setting. On the other hand, if what you look for is convenient, then we have to spend a little bit more, such as what FlashForge can offer. This company is pretty well-known in terms of high-end choices but also because their machines are coming with more features than typical small FDM printers.
They have lots of interesting options which we do think will match with so many different users, especially learners because of how simple their machines are. The only drawback is probably they can cost almost twice compared to entry-level printers that can work for the same build capacity. If capacity is not the most important, the FlashForge Adventurer 3 and Finder are two promising options to consider. They are equally designed with a clean setup, ease of use, and compactness in mind.
The Finder is more budget friendly however and just like anything, there must be something omitted from the machine to make up for the cost reduction so between the FlashForge Adventurer 3 and Finder, your Finder will be simpler and the one with smaller build volume. It is not a bad choice at all considering the machine is easy to set up and print with, moreover if you only want to print smaller pieces.
FlashForge Adventurer 3 and Finder Design
What we love the most from these printers besides how they are operated is actually how they are designed itself. Entry-level machines are usually bare, with only the two frames and a base to support the operation but FlashForge machines are often coming with a full enclosure such as the Adventurer 3. This machine is fully enclosed with two transparent sides and one of them is the door to access the printing room. The Finder’s housing on the other hand is just a casing.
This machine has an open style but is placed inside a cube-like housing which makes the extruder easier to access from the top of the housing. In addition, the overall form factor of these machines are also not the same at 388 mm x 388 mm x 405 mm for the height of Adventurer 3 and 420 mm x 420 mm x 420 mm for the Finder machine. As you can see these machines have a touch-screen for accessing the menu but Finder only has a smaller version of it at 2.8 inches instead of the full size 3.4 inches.
FlashForge Adventurer 3 and Finder Build Volume
Next let’s move to the most important part or what the FlashForge Adventurer 3 and Finder can offer starting from the build volume. Build volume is necessary to consider because not all of us will use the machine for the same purpose and to make sure that we are capable of working on various projects in the future, it is wise to consider what type of object you will be making with the printer. Both of these printers are only capable of making 150 x 150 x 150 mm and 140 x 140 x 140 mm models respectively.
FlashForge Adventurer 3 and Finder Build Plate
Next we want to talk about the building plate on both printers and here they are also similar yet different. The similar part is the two are equally small and due to this small build volume we don’t have the same level of concern of misalignment which removes the risk of unleveled bed as much as in bigger machines. There is no automatic bed levelling but they are using zero calibration which is very effective due to the limited bed size and build volume.
The difference is the bed in Finder doesn’t come with a heating element which makes the type of material that can be used with this machine more limited as well compared to Adventurer 3 which is heated up to 100 degree Celsius. However, for the extruder, both FlashForge Adventurer 3 and Finder seem to be able to be heated up to the same temperature of 240 degrees.
FlashForge Adventurer 3 and Finder Features
Lastly we want to talk about what else you can get from these machines and the prominent difference here is because the Adventurer 3 has an internal camera inside the printing room which is very useful to make sure your model is coming out well even though you are not currently present in the spot. It makes the machine easy to access from anywhere as long as it is connected to the local network but, it is not necessary to create a good printing result as the two are already very much capable.
While the Finder doesn’t have a camera, this machine already has Wi-Fi connectivity but, another thing it lacks is the spool which doesn’t come with the machine so we have to make it our own or buy it separately.
flashforge Adventurer 3 Lite vs Finder
There are so many good machines to start 3D printing with such as FlashForge Adventurer 3 and Finder. These brothers are not exactly the same to each other because they are made with different added features which makes the Adventurer 3 the more capable machine with a larger build volume, fully enclosed housing, heated bed, a camera inside the chamber, and the spool accessory.
Conclusion
There is no bad option between the two because they are very capable in terms of printing conveniently yet, if you can invest more, we highly recommend getting the Adventurer 3 as it has more to offer and overall improved user experience.