Skip to content

Anet A8 vs ET4

  • by

The Chinese 3D printers producer, Anet, has become famous in the world of 3D printing in the course of recent years with Anet A8. Its low cost and competitive printing quality made it exceptionally alluring for some individuals and it turned out to be extremely famous in a brief timeframe. 

Tragically for Anet, simpler to assemble and better 3D printers turned out to be progressively cheaper and thus, the A8’s sparkling star immediately dulled. Quick forward to today, Anet’s most up-to-date horse in the race has been Anet ET4. 

This machine is without a doubt very modern, with a clean all-metal construction and a 2.8-inch touchscreen interface. That being said, what might people want from a 3D printer? 

In case you are a designer, what is significant for you principally is the print quality, consistency, and that the printer is anything but difficult to utilize. You would prefer not to think a lot about how 3D printers work, programming hacks, and workarounds. 

You need a dependable machine that has great print quality and does not give you an excess of difficulty. This is where a 3D printer proves to be useful. 

In this article, we will be looking further into Anet A8 and Anet ET4 so you can discover which 3D printer makes a better purchase. So, without further ado, let us check out the article down below.

Build and Design 

  • Anet A8:

Some may locate the general design of Anet A8 a bit too trashy or shortsighted, yet we actually found the moderate structure to profit the performance. The open-finished style permits you to effectively change and delve into each nook and cranny of the 3D printer. Read also: Creality Ender 3 Pro Vs Ender 3 V2.

For instance, after gathering, we understood that the toothed belt was not attached tight enough. Not only is there a restricted measure of elastic belt material (implying that one spoil would damper the entire task), yet you likewise need to fit the segment into restricted spaces and guarantee that there is sufficient strain. 

  • Anet ET4:

From the outset, the ET4 shows up nearly wire-free. The hardware is tucked conveniently inside a solid sheet-metal control box underneath the print bed. 

This makes the printer simple to gather which makes for a wonderful arrangement experience for beginners. 

Anet A8Anet ET4
Product Dimensions20.2 x 12.3 x 8.2 inches
19.1 x 17.6 x 8.7 inches
Shipping Weight18.96 pounds
20.3 Pounds
Best offerCheck priceCheck price


  • Anet A8:

The greatest feature here is the large-build volume. This Chinese 3D printer is marginally more generous than most other 3D printers in a similar price range. Having a large-build space implies you can print more unpredictable 3D models. 

The A8’s large-build volume turns out to be much more prominent once you consider that most items that go for 200 USD or less are of the “smaller than expected” assortment. The A8 has an open filament framework, accepting filaments from third-party merchants as long as the filament measurement is 1.75 millimeters. 

The Chinese producer lets you utilize any filament available with no conditions or compromises that may make you look the other way. On a related note, the A8 is additionally open to various slicers and is viable with the absolute most well-known slicers available. 

  • Anet ET4:

Auto-leveling is getting more normal in budget FDM machines today and Anet ET4 is no exemption. The machine estimates 25 points over the area of the print bed with a probe mounted close to the extruder and (hypothetically) makes up for deviations. 

This will assist you with a lopsided bed and result in a better first layer performance over the 220 x 220 mm print area. Before arriving at the Bowden-type extruder, the filament enters two frameworks. 

The first is a filament runout sensor showing an on-screen message requesting new material. The subsequent one transports the filament to the extruder. 


  • Anet A8:

Out of the case, the A8 is extremely restricted. It is practically restricted to PLA, for one.

Utilizing the default print settings, the A8 can effectively print one of the little probe models on the SD card, yet the print quality is not acceptable. It is what occurs after only a modest quantity of dabbling that will amaze you.

On the off chance that you tinker with the print settings and ensure all the parts are designed accurately, particularly the print bed, the A8 can create results with an extensive jump on paper quality. The edges become observably smoother and the subtleties become more pronounced. 

  • Anet ET4:

Propelling and managing 3D printing jobs on the ET4 is direct. During 3D printing activities, Anet ET4 shows buttons on the control panel that permit you to change the settings should you wish to supersede the settings baked into the GCODE. 

The most astonishing thing about the ET4 is its commotion level — there is not any. The movement framework is produced using these hard elastic wheels that appear to be a lot quieter. 

The stepper engines are practically unnoticeable except if you get close. We estimated the noise at just 40 dB a ways off of 1m from the ET4. 

 Anet A8 vs ET4

- Easy installation, 5 keys 2004 LCD screen display, easy control, smart board, pause at anytime, best budget for DIY lovers
- High compatibility: supporting XYZ printing bio-degradabl and multiple filaments like - ABS/PLA/HIP/PRTG/TPU/Wood/Nylon/PP etc
- Customized MK8 extruder: 0.4mm metal nozzle sophisticated technology, stable print, visual experience.
- Acrylic + Lead Screw frame is very stable.
- Filament detection that detects the filament end and sent reminder to avoid air-printing. 2.8-inch full-color touch screen for easy operation.You can upload your design and print it online or offline.
- Resume printing and recover from exactly where it left off. No worries about unexpected power outages. Automatic load and unload the filament with touch screen.
- 6 Screws + 3 Cables, modular design with quick assembly in 10min. Terminal pinboard design with integrated connection ports, covered wires and a more sleek appearance.
- Industrial grade chipset that allows more accurate, fast print. Protected with safety features like overcurrent protection, overload protection, over temperature protection

Final Verdict 

We reckon Anet A8 is not for everybody. It is a budget 3D printer that requires a lot of mods out of the crate, for performance improvement as well as for security purposes. 

Yet, once completely advanced, it brings magnificent long-term worth and transforms into an absolute workhorse equipped for delivering 3D models with noteworthy print quality. Be that as it may, make sure you are completely ready to do a great deal of dabbling and are set up to run into many disappointments before you focus on this modest DIY unit. 

Meanwhile, Anet E4 probably will not have performed well in the physical measurements’ tests nor at visual assessment. After around 10-hours of printing with Anet ET4, many were disappointed with the aftereffects of the first prints. 

On the off chance that you are happy to invest some effort with the machine to raise prints to an acceptable level, you do profit by a tough printer with a decent highlight set – yet different companies offer comparative highlights for less.