When we decide to buy a 3d printer, the price, quality, and operation method should be considered. Price may be an initial consideration for some people who may be new to or studying 3d printers, because for the start of learning, of course, we don’t want to spend a lot of money just to know the basics of a 3d printer machine.
After being able to master the types and also their constituent components, most people just started to dare to spend more money to develop their knowledge. Nowadays people also prioritize quality more than just price.
Quality and ease of operation are the last benchmarks in considering before buying a 3d printer. With the ease of operation provided, it can help people to be able to speed up or even save the time spent completing their work.
Anet A6 is a 3d printer launched to enhance the previous printer, the Anet A8. With a few changes, it has made Anet A6 in great demand. In addition to the price being the benchmark, the quality provided is equally good by the price offered.
|Ender 3 Pro
|20.2 x 19.3 x 7.1 inches
|20.94 x 15.04 x 7.91 inches
This printer comes with a direct drive extruder and prints really well when everything is installed correctly. With its standard extruder, the A6 can print at nozzle temperatures of up to about 230 degrees Celsius, this means that it can use materials such as ABS, PLA, and any material that prints at temperatures of 230 degrees Celsius and below.
Despite its smaller size, the Anet A6 can produce a taller print in the Z-axis because of the way the X scale is mounted. The build volume is 220 by 220 by 250 and can produce a total break because the X scale is mounted in a horizontal made, so it becomes a bit more stable.
It uses the acrylic type of frame as Anet A8 use. But the frame on the Anet A6 is a bit stronger because the whole front side of the greater is made from a single piece of acrylic sheet, so if you want to warm or shake on the printer, you’re going to find that it has a more rigid frame.
LCD is bigger and nicer which is much easier to use and navigate to the software, so it’s enjoyable because of the log. Despite the LCD as well if you need to reboot the printer or reset there is a control button for that.
Anet A6, with its original setup, is capable of producing pretty good prints. However, a series of upgrades and adjustments that it can make has made it very popular. A suite of upgrades, components, and online help for the A6 makes it a great tool for those of you who like to tinker with, upgrade, and modify 3D printers.
Ender 3 Pro
The most obvious thing is the removable flexible magnetic bed, and it has a little notch on the front to help you peel it off. This surface works great with PLA, wood, flex, or even PTG but anything above eighty degrees is going to destroy its magnetism because of the curing effect. Therefore ABS is now of the cards with this builds surface.
It has a proper Meanwell 500 watt power supply which is thinner, quieter, and better quickly than on the standard Ender 3. Also, it does have a cooking fan but the difference is that the cooling fan only comes on when it needs to reduce the noise.
Well, Ender 3 Pro is a trusted brand and it’s built that reputation from years of quality products. Therefore, there should be an even smaller chance than before of anything falling and catching on fire.
Banner extrusion for the Y-Axis has changed to 40 by 40 millimeters just like on the CR10 mini, CR10, and CR10s. The standard end rate it’s 40 by 20 millimeters, so on the Pro version heat bed wheels have a wider surface to balance so you got a more stable heated bed.
A lot of people did with the original Ender 3 was to print a cover for the fan so no debris could fall, clog the fan, and overheat the mainboard. This has now been inverted, so everything is underneath the printer and there is no chance of that happening anymore.
The SD card reader and the USB swap have lifted and it’s a little bit easier to plug things in and out without your hand hitting the table setup. Their motherboard uses hot glue to secure the connection. There is a limiter on the Z-stop switch bracket you cannot miss the correct Z-stop position when you installed it.
There is no fan on the top of the control box, instead, they move it on to the bottom underneath the frame and now there is no worry that the filament or any print pieces can clog the fan. Their motherboard uses hot glue to secure the connection. There is a limiter on the Z-stop switch bracket, you can’t miss the correct Z-stop position when you installed it. Read also: Artillery Genius vs Ender 3 Pro.
Anet A6 vs Ender 3 Pro
I think these two 3d printers have the same good performance, it’s just that the Ender 3 Pro is slightly superior to the Anet A6. In addition to faster printing speeds, Ender 3 Pro also has a better printing surface. However, because it is a DIY printer type, it takes a little patience in assembling it if you are not used to assembling a 3d printer.